Cell Phone Signal Boosters in Australia – Buying Guide
Australian mobile network providers make sure to provide good coverage within large cities and suburban areas. However, when it comes to rural areas as well as spots remote from cellular base stations, a mobile signal is often weak or practically non-existent. If you happen to live in such a place, you don’t have to refuse from cool modern smartphones, which normally have worse signal reception than older devices. Your remedy for better cellular reception is one of the cell phone signal boosters in Australia. Thanks to their amplifying capabilities, you can enjoy voice calls and mobile internet to the fullest.
What is a Signal Booster?
Its name speaks for itself – a cell phone signal booster significantly improves the quality and consistency of mobile signals. Basically, it is a box with outdoor and indoor antennas and an amplifier. The external antenna receives a signal from your mobile carrier, passes it to the amplifier. The amplifier increases its power up to 30 times and then steers the enhanced signal to the internal antenna. The latter expands the signal inside your house or wherever you install your booster.
Most of the boosters are able to handle 3G, 4G, and LTE signals. However, if you want to make use of the benefits of 5G networks, you will need a 5G mobile signal booster in Australia. Because 5G technology significantly differs from 4G and its predecessors, it is impossible to modify 4G into 5G with a booster. So consider this specificity when purchasing an amplifier. Though 5G is not yet officially launched in Australia. The 5G which is being marketed and sold is actually advanced 4G LTE. So, do not buy any 5G signal booster yet because 5G signal boosters are not yet manufactured.
Also, you must keep in mind that boosters enhance mobile signals but they are unable to create them out of nothing. If a signal fails to reach your area, a booster will have nothing to work with. Zero signal multiplied by 30 is still zero.
Telstr Mobile Signal Boosters in Australia
Telstr is Australia’s largest mobile network carrier. Let’s quickly take a look at some statistics:
- its network covers 2.4 million square miles of country’s territory (1/3 of landmass);
- the coverage spreads across 60% of Australian bush;
- it is available to 99% of Australian households.
These figures are really impressive. That said, Telstr coverage is not always ubiquitous. Some rural areas may face the weak signal issue. On top of that, landscape (such as mountains, hills, and bluffs) might kill cell signals whatsoever. Even building materials can inhibit electromagnetic frequencies from penetrating inside buildings. So, there is always a possibility that your signal becomes less than perfect even in areas with seemingly good coverage.
Luckily, you can easily solve the problem of poor reception with a Telstr cell phone signal booster. This device works with the same frequencies as Telstr (850MHz and 2100MHz for its 3G coverage and 700MHz, 900MHz, 1800MHz, 2100MHz, and 2600MHz for the 4G network) and is able to catch even the weakest signal. If you are tired of seeing only one bar on your phone, it’s time to turn it into five bars with a Telstr mobile signal booster.
Optus Mobile Signal Boosters in Australia
Mobile provider number two in Australia is Optus. It serves 50% fewer territories than its main competitor. Nevertheless, the provider claims to cover regions where reside 98% of the population.
While you’re unlikely to run into connectivity problems in the coastal regions of Australia, its network is bristling with dead spots pretty much everywhere else. If you enjoy spending your weekends in rural areas, your signal might go on and off.
If you don’t want to become unreachable once you leave an urban area, you should really consider getting an Optus cell phone signal booster. You can install one in your house or car. If you need to amplify a signal in larger indoor areas (such as hotels, restaurants, offices, etc.) powerful boosters are able to broadcast their signals across 5000 square feet and more. No matter which option you go with, Optus mobile signal repeaters are compatible with the frequencies of 900MHz and 2100MHz for Optus 3G coverage and 700MHz, 1800MHz, 2100MHz, 2300MHz, and 2600MHz for its 4G network.
Vodafone Mobile Signal Boosters in Australia
The smallest share of the Australian telecom market belongs to Vodafone. Although its network is slighter than that of its competitors, it covers about 22 million Australians out of 25. Vodafone cell towers are widespread in the urban and suburban areas but the coverage in smaller towns and rural regions leaves much to be desired.
Even if you’re an urban dweller, you might strike various problems with cell phone signal reception raging from dropped calls to a slow data connection. This may happen because you’re too far from a cell site, your house has thick walls, or buildings around you obstruct the transmission. Whatever the reason, a Vodafone mobile signal booster is capable of solving the one-bar issue. It works in sync with Vodafone frequencies (900MHz and 2100MHz within its 3G network and 850MHz, 1800MHz, and 2100MHz for the 4G coverage) and is able to dramatically amplify a signal as if a cell tower was right in your backyard.
How to Choose Cell Phone Signal Boosters in Australia
As we have already mentioned, mobile signal boosters enhance weak signals but they can’t create them out of nothing. Therefore, if you live / work / repose in a place with no signal altogether, a booster is going to be important. So, the first thing you need to consider is cellular signal (no matter how feeble it is) availability.
The next step is to check what kind of network you utilize. Most of the time, it is going to be either 3G or 4G. You need to select a booster accordingly. If you don’t know what type of signal you receive or if they alternate, there are versatile amplifiers compatible with both 3G and 4G. As Australian mobile network operators keep deploying their 5G networks, 5G mobile boosters for Australia are already in the pipeline.
The majority of signal boosters are compatible with all three Australian network providers. All-in-one models are an excellent choice for offices and households utilizing varying operators. Plus, if one day you decide to switch to a different provider, you won’t have to buy a new booster. At the same time, there are plenty of carrier-specific signal amplifiers at a more budget-friendly price.
Finally, when picking a signal booster, you need to decide where you’re going to utilize it. You can choose the boosters for small apartment, house, or large office spaces. Different models of signal booster cover varying spaces, from 350 to 5000 square feet. If you want signals to reach every corner in the building, you should pick a booster with the appropriate coverage.
If you’re in search of excellent cell phone signal boosters in Australia, we’ve got you covered. We deliver a wide range of signal amplifiers designed for all types of premises and compatible with 3G and 4G networks by Telstr, Optus, and Vodafone.